EWC FlowBoost 10M

Solving low pressure water issues. The EWC Flowboost 10M is designed for pressure boosting mains pressure water. Flowboost uses an electric motor-driven peripheral pump with bypass, complete with an automatic control system consisting of flow switch and electronic control.

The on-demand WRAS approved pump is powerful with a flow rate of 10 LPM yet operationally quiet with a sound output of just 48dB aided by vibration dampening feet.

KEY BENEFITS

  • Pressure Boosting
  • Quiet Operation
  • Compact Design
  • WRAS Approved
  • Built-In Protection

Need help?

Features & benefits

Up to 1.5 bar pressure boost

Increases outlet pressure by up to 1.5 bar above the available incoming mains water pressure.

Up to 10 litres per minute

Provides a maximum flow rate of 10 litres per minute, within the stated limit for direct mains-water boosting without prior water-supplier notification.

WRAS-approved pump

Incorporates a WRAS-approved internal pump for use within a correctly installed mains-water system.

Automatic on-demand operation

An integrated flow switch and electronic control system start and stop the pump automatically as water demand changes.

Thermal and dry-run protection

Built-in safety controls help protect the pump against overheating and operation without sufficient water.

Integrated check valve

Includes a non-return valve to help prevent reverse flow through the pump. Any additional backflow protection required by the installation regulations must still be fitted.

Quiet operation

A typical sound level of approximately 48dB, supported by vibration-damping feet, helps reduce operational noise.

Cold-water applications

Suitable for incoming water temperatures between 4°C and 25°C.

Standard plumbing connections

Features ¾-inch BSP inlet and outlet connections for integration into compatible commercial water systems.

Safety features

The Flowboost 10 is designed with several safety mechanisms to ensure reliable operation. Its thermal cut-out feature automatically shuts off the system in case of overheating, protecting the pump from damage.



Additionally, the dry run protection prevents the pump from operating without sufficient water, reducing wear and the risk of failure. These features work together to enhance the pump’s durability and extend its lifespan, making the Flowboost 10 a dependable and safe choice for users

Dimensions and capacities

Description Height
(mm)
Width
(mm)
Depth
(mm)
FB 10M 340 210 383

Enquire about this product today

Speak to our team directly today to learn more about this solution.

Phone us

Mon-Fri from 8am to 5pm (UK)
 
+44 (0) 1279 780250

Head office

Head Office, United Kingdom, Regal House, South Road, Harlow, CM20 2BL

P1014121 1

Need help choosing the right system?

Our expert team is on hand to provide professional advice, pairing you with the ideal solution for your specific requirements.

Become a WaterCare distributor

Open an account with WaterCare today and
join our network of trusted distributors.

Related products

flexible drainage for combi ovens

Combi Pump CB7

The WaterCare CombiPump series has been designed and developed by our own research and development team at the request of a leading combination oven manufacturer specifically requiring waste water from their oven to be pumped away at a height of just 70mm from the floor.

View product

low-level drainage from just 40mm

Combi Pump CB4

The WaterCare CombiPump series has been designed and developed by our own research and development team at the request of a leading combination oven manufacturer specifically requiring waste water from their oven to be pumped away at a height of just 40mm from the floor.

View product

high-flow boosting for demanding systems

Flowboost 35T

The EWC Flowboost 35T is designed for pressure boosting applications in vented stored hot or cold, clean fresh water systems, where under gravity, low or no flow is available.

View product